你的位置:首頁 > 新聞動態 > 美國DWYER新產品1%高精度差壓表

美國DWYER新產品1%高精度差壓表

2017-09-21      點擊:226

Dwyer 2000 - HA 高精度MAGNEHELIC®微差壓表 高精度差壓表 高精度差壓表壓力表
精度1% 。鏡像縮放疊加消除視差誤差六點校正證書 IP67防護, 全方位防護,可適合灰塵和浸水情況

 

高精度差壓表壓力表高精度差壓表

* 可選耐腐蝕刷304 SS 邊框

 FEATURES/BENEFITS

• Accurate within 1%

• Mirrored scale overlay eliminates parallax error

• Six point calibration certificate included

• IP67 - Fully protects against dust and immersion

• Optional corrosion resistant brushed 304 SS bezel

高精度差壓表 高精度差壓表壓力表

APPLICATIONS

• Clean room positive pressure indication

• Filter monitoring

• Air velocity with Dwyer pitot tube

• Blower vacuum monitoring

• Fan pressure indication

• Duct, room, or building pressures

 

Note: Shown with optional -SS bezel

 

高精度差壓表壓力表

DESCRIPTION

The SERIES 2000-HA High Accuracy Magnehelic® Gage is twice as accurate as the standard Magnehelic® gage. The well-engineered High Accuracy Magnehelic® Gage offers a mirrored overlay as standard in order to eliminate any parallax error when taking measurements. A six point calibration certificate is included with each high accuracy model. The rugged IP67 casing helps fully protect against dust and water ingress. The redesigned corrosion resistant brushed 304 stainless steel bezel option offers a clean tapered design, yet minimizes the possibility of any dust accumulation on the edges.

高精度差壓表

 

SPECIFICATIONS

 

Service

Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen.Order a Buna-N diaphragm. Pressures must be less than 35 psi.

WettedMaterials

Consult factory.

Housing

Die cast aluminum case and bezel with acrylic cover. Exterior finish is coated gray to withstand 168 hour saltspray corrosion test.

Accuracy

±1% FS (±1.5% on -0, -100PA, -125PA, -10MM and ±2% on -00, -60PA, -6MM ranges) throughout range at70°F (21.1°C).

Pressure Limits

-20 in Hg to 15 psig (-0.677 bar to 1.034 bar).

Overpressure

Relief plug opens at approximay 25 psig (1.72 bar), standard gages only. See Overpressure Protection note oncatalog page.

Temperature Limits

20 to 140°F (-6.67 to 60°C).

Size

4" (101.6 mm) diameter dial face.

MountingOrientation

Diaphragm in vertical position. Consult factory for other position orientations.

ProcessConnections

1/8" female NPT duplicate high and low pressure taps – one pair side and one pair back.

Weight

1 lb 2 oz (510 g).

StandardAccessories

Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters, and threeflush mounting adapters with screws.

AgencyApprovals

Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

 

在線客服
在線客服
用心服務 成就你我
95至尊游戏官方网站,九五至尊vi登录网址,九五至尊老品牌线路